IN ASSET AVAILIBILITY
24/7 365 Customer Service
IN ASSET AVAILIBILITY
Challenging Case Studies.
Problems and their Solutions.
Drive cleaning avoids fire
Drive Cooling Air circulation circuit found to have been hanging open which was found during routine maintenance causing all the plywood dust to enter the Drive.
Flammable Plywood dust in high voltage electric circuit is a Fire Hazard. Drive failure due to over temperature caused by choked Heat sinks.
Cleaned out Drive with specialised vacuum and fixed the Cooling Air Circuit securing drive from similar situation in future. drawings.
Complete plant shutdown due to faulty
Complete plant shut down for over 8 hours with site electrical engineer on leave and the site engineer not able to trace the problem.
AnyDrive365 traced out the faulty E-stop circuit. The function was temporarily disabled allowing the plant to operate over night. The customer was advised to fix the E-stop wire break as soon as possible.
Electrical drawings were not available at the site. AnyDrive365 traced out the problem without any drawings.
Utilities – Water
Quick response ensures water continues to flow in Welsh village
AnyDrive356 received a call from a client with a request to help with the repairs to a burst pipe.
A team of four engineers immediately attended the site, taking one of Central’s Hire Fleet with them.
The Hire Fleet comprises drives from 2.2KW up to 400KW, and on this occasion a drive was hired to run a 4-20 signal on the pressure transducers.
The action taken by AnyDrive365’s team ensured the work to the burst pipe could continue without affecting the water supply to the residents of the town.
All work was completed in a period of six hours, from initial call out to final solution.
Drive gets back up and running
At 9am on Easter Sunday, AnyDrive365 received a call from Hanson Cement in Mold.
The site’s electrical engineer was calling to report that the site was down due to a 250kw drive failing.
AnyDrive365’s Service Manager went straight to the workshop where a identical, spare drive was loaded onto the van and taken to the site.
The old drive was removed to be repaired and the spare drive installed and commissioned.
Smooth running at Cambridgeshire site
AnyDrive365 was recently contacted by the Environment Agency with a request to visit to one of their pumping stations to test and service three resistance starters.
Kennett Pumping Station is based in Cambridgeshire and pumps water between the River Ouse and two local reservoirs. A maintenance visit was required to check and overhaul several pieces of equipment at the site.
As a UK distributor of AOIP products, AnyDrive365 was able to service the units and replace the oil and chemicals in all three of the 2600kw, 11,000volt starters.
The job was completed quickly and efficiently over a period of three days, ensuring minimum disruption on site and the continued smooth running of the site’s motor units.
Why Choose Us
Trained experts can provide quick, operational solutions and can handle all elements of an urgent project.
We respond to emergency situations quickly and efficiently to provide our client’s with peace of mind.
We have strong relationships with our suppliers and carry relevant stock and spares to ensure a seamless solution for our clients.
Our engineers are supported by fully equipped vehicles which enable them to carry
out emergency on-site repairs and servicing.
With our HQ in Merseyside and offices in the Midlands
we are in a prime location to serve our customers on a national basis.